GMD 25 F Series Front Mounted Mowers

GMD3525F_02_Sil.png

Modern Style, Meets Great Performance

KUHN GMD 25 F Series front mounted mowers, with working widths ranging from 10’2” to 11’6 can be used on their own, or as part of a triple-mower combination allowing you to cut up to 32’6” in one pass.

Contact your dealer for pricing

Find a dealer near you

KUHN is the reference in the front mount mower market with the GMD 25 F Series front mounted disc mowers. These mowers feature an attractive, functionally designed headstock that offers exceptional terrain following, flexible enough to adapt to any terrain changes encountered in the field. The compact frame, shaped like a hammerhead shark, offers improved visibility for the operator. These machines feature the heavy-duty Optidisc® Elite cutterbar utilizing a through-bolted design and lubed-for life technology, which guarantees minimal maintenance and maximized cutting efficiency. Protectadrive® safety provides maximum reliability and quick service, and the Fast-Fit® knife system allows you to quickly change out the knives with the use of a simple tool. For even greater mowing efficiency, combine a GMD 25 F Series front mount mower with one of KUHN’s GMD 30 Series rear mounted mowers.
GMD3525F_9530_Action_03.jpg

Your benefits

The Optidisc® Elite Cutterbar: A Clean and Consistent Cut

GMD3525F_Cutterbar.jpg

Lubed-For-Life Optidisc® Elite Cutterbar

The Optidisc® Elite cutterbar provides a flat, streamlined profile so that soil and crop residue do not accumulate and material flows smoothly, even in heavy, difficult crop conditions. These mowers come standard with the Fast-Fit® quick release knife system. Optidisc Elite cutterbars are designed and tested with a zero oil change interval. The highly-polished gears and synthetic gear oil ensure that this system does not require any regular internal maintenance, eliminating the need for cutterbar oil changes throughout the life of the machine.

Differential Disc Spacing

The innovative design of the Optidisc Elite cutterbar offers exclusive differential disc spacing.
  1. Less Distance for a Clean Cut: Narrower spacing at diverging discs provides greater knife overlap, which results in a clean cut, even when the grass is short or light.
  2. More Distance for Easy Crop Passage: Wider spacing at converging discs provides more space for the crop to pass. Cut crop is quickly carried away from the cutting area, greatly improving the cut quality.
OptidiscElite_DifferentialSpacing.png

Standard Fast-Fit® Knives

The Fast-Fit® quick-release knife system allows an operator to rapidly change out cutting knives with the use of a simple tool, yet still retain optimum cut quality and knife life. With Fast-Fit, an operator can achieve up to 50% time savings over a standard system.
GMD_Adjust_06.jpg

Protectadrive® Disc Bearing Stations

  • Protectadrive® Safety: Every minute saved during the hay season is precious. Ultimate protection, from the externally removable Protectadrive disc bearing stations, provides maximum reliability and quick service. In the event of an impact between a disc and an obstacle, the shaft holding the disc can shear just above the bearing. This is thanks to its carefully dimensioned shear groove. As a result, the gear teeth are protected.
  • Extra Rigidity Where it Counts: Disc bearing stations are attached by bolts that pass through the entire cutterbar. This is an exceptionally strong and secure attachment with no risk of mount being torn out of the cutterbar in case of shocks. The disc drive pinion is held precisely in place, all resulting in excellent reliability and reduced maintenance costs.
  • Gear-to-Gear Power Transmission: Gear-to-gear power transmission, a staple of all KUHN disc mowers, allows for maximum power to be transferred through all gears in the cutterbar. Unlike other gear cutterbars, equal sized gears throughout reduces torque on the gear teeth and leads to unsurpassed reliability and longevity.
GMD_Elite_Protectadrive.png

Converging Drums

The converging drums work together with the OptiDisc® Elite cutterbar to create smooth swaths, narrow enough to fit between the tractor tires to avoid value robbing run-over of the cut crop. Drums are powered via shafts to ensure full power in all mowing conditions.
Converging_Drums.jpg

Exceptional Terrain Following

TerrainFollow.png

Superior Ground Adaptation

Front mowing units have to remain flexible enough to smoothly adapt to any terrain changes they may encounter. At the same time, they are often subject to higher stress. The KUHN front mount mowers are designed for this purpose, they feature a pendulum-type articulation of the mowing unit and significant adaptability characteristics. They can oscillate left to right at an angle of up to 30° and cover a vertical travel range of 27.5”.

Easily Adjustable Overlap

For a clean cut on slopes and bends, the overlap between the front and rear units can be adjusted hydraulically between 12” and 18” (depending on the model combination) – even while driving. This is a real benefit for tractors with wide wheel spacing or large wheels.
ModularOverlap.jpg

FlexProtect™: Flexible Protection

FlexProtect™ side shields protect the edges of the machine from damage when driving along field edges or near obstacles. The side shields, made of high-density polythene material, will bend without breaking or damaging the mower. The material then returns back its original shape. When operator’s switch to the transport position, the FlexProtect side shields can quickly be folded up on both sides to reduce transport width.
GMD_FlexProtect.JPG

Time is Money

GMD25F_DriveShaft.JPG

Maintenance-Free Drive Shaft

The direct design provides easy access for servicing and fully eliminates belts. Reliability is greatly improved when working in longer, tough or lodged crops. Unlike competitive models that require daily greasing, the driveshaft to the cutterbar uses maintenance-free U-joints. These joints reduce overall maintenance and eliminate excessive wear from improper lubrication.

Triple the Efficiency

The race for high output is never ending. Farmers have increasingly larger areas to harvest, optimal mowing periods are limited and producing top quality forage is essential.

KUHN is here to support you in the inevitable race for output. Pair a GMD 25 F Series front mounted mower with a KUHN GMD 30 Series rear mounted mower for the ultimate triple-mower combination. The total combined working width, of up to 32’6”, knocks down large fields in no time, while exclusive features provide strong returns on investment by reducing maintenance and downtime.
GMD3525F_9530_Action_03.jpg

Equipment

GMD3125F_4411_Action_01_MAW.jpg

Specifications

SPECIFICATIONS
 
Working width
Transport width
Transport height
Cutterbar
Number of discs
Number of flat discs
Blade retention system
Removable Protectadrive® disc bearing stations
Hydraulic lift mechanism
Cutterbar suspension
Cutting height
Suspension travel
Safety breakaway system
Headland turn position
Average swath width
Swathing system
Swath wheel
Hitch
Primary PTO
PTO speed
Friction slip clutch
Free wheel
Minimum PTO power requirement
Control box
Required tractor hydraulic connections
Road lights and signaling
Machine weight approx.
GMD 3125 F GMD 3525 F
10'2" (3.1 m) 11'6" (3.5 m)
9'10" (2.99 m) 11'5" (3.48 m)
6'7" (2.0 m) 6'7" (2.0 m)
Optidisc® Elite Optidisc® Elite
7 8
5 6
Fast-Fit® Fast-Fit®
Standard Standard
Standard Standard
Lift-Control® hydropneumatic with torsion bar assist Lift-Control® hydropneumatic with torsion bar assist
1.4" - 2.6" (35 - 65 mm) 1.4" - 2.6" (35 - 65 mm)
Vertical travel 27.5" (70.1 cm) Oscillation 30° Vertical travel 27.5" (70.1 cm) Oscillation 30°
Pro-Active Lift® Pro-Active Lift®
Integrated hydraulics Integrated hydraulics
3'3" - 4'11" (1.2 - 1.5 m) 3'3" - 4'11" (1.2 - 1.5 m)
Belt driven drums (1 per side) Belt driven drums (1 per side)
- -
Cat. 2, 3-point front mounted Cat. 2, 3-point front mounted
CW or CCW 1 3/8" - 21-spline front CV PTO shaft (ideal for tractors that have a front PTO shaft whose center is less than 2' (0.6 m) from the ground. As an example all JD 8R series tractors.) CW or CCW 1 3/8" - 21-spline front CV PTO shaft (ideal for tractors that have a front PTO shaft whose center is less than 2' (0.6 m) from the ground. As an example all JD 8R series tractors.)
1,000 rpm 1,000 rpm
Standard Standard
Standard, integrated into lateral gearbox Standard, integrated into lateral gearbox
75 hp (56 kW) 85 hp (63 kW)
- -
1 SA with float 1 SA with float
Standard Standard
2,435 lbs (1,105 kg) 2,600 lbs (1,180 kg)

Media

GMD3525F_9530_Action_03.jpg

Available applications: GMD 25 F

Download on the App Store

Check all our other KUHN apps to optimize your farm and your life

Get it on Google Play