Vari-Leader - Powerful Structure for Long Term Reliability

Powerful Structure for Long Term Reliability

On the KUHN Vari-Leader plows, cutting width can be adjusted on-the-go from the cab. This is beneficial for plowing in smaller and non-square fields, and when plowing different soil types.

Contact your dealer for pricing

Find a dealer near you

Download the Literature

Benefits
Equipment
Media
Testimonials

Using the KUHN Vari-Leader plow, operators will benefit from a number of features including reinforced box sections, rapid adjustment of furrow widths and superior protection systems. Working right up to the edge of the field is necessary to get the most out of your cropland, while limiting weed development. To meet this requirement, KUHN has integrated the wheel extremely close to the frame due to its shape. An extra-large wheel reduces pulling power requirements, provides good bearing capacity and allows for operation in difficult end-of-season conditions.

Heavy-Duty Components for an Increased Machine Life

Non-Stop Hydraulic (NSH) Reset

When a field obstacle is met, a rapid breakaway of the plow leg occurs. Once the obstacle is passed there is an increase in pressure, bringing the bottom quickly and firmly back into working position. The system also acts as a shock absorber in rocky ground, increasing plow life.

Headstock and Frame

For added reliability, the structure is made using a large, machine-welded frame measuring approximately 7” x 7”.

Triplex Steel

Moldboards are made of unequal layer, heat-treated Triplex steel that have an increased working life up to 40% over standard steel and a hard wearing surface over 1/8” thick.

Moldboard Choices to Match Your Needs

H4 Moldboard

The H4, helicoidal, Scandinavian-type moldboard provides well-formed plowing to a normal depth range of 7-12”. The share is fitted with a reversible/replaceable point that greatly increases the life of the share. Recommended for fall plowing, the H4 moldboard is especially suited for heavy and damp clays. Furrow passes are well defined and trash burial is excellent.

N Moldboard

The helico-cylindrical N moldboard plows to a depth of 14”. Designed to be highly versatile, it is cylindrical at front, helicoidal at rear. A low draft ensures a partly broken furrow with excellent trash burial. Recommended for spring plowing, this moldboard is versatile and works well in sandy or clay soils.

VP Slatted Moldboard

VP Slatted Moldboard: The VP slatted moldboard composed of independent and interchangeable slats. Reduces pulling power, due to a lower moldboard surface area. Designed for use in extremely sticky muck and clay soils. Not for use in sand or loam soils or in soils with rocks or stones. The multiple slats allow individual replacement from wear.

Enhance Your Productivity in the Field

On-Land Offset

On-land offset is available to enhance productivity. The soil sometimes requires wide or dual tires that cannot be used for in-furrow plowing. If the tractor is setup for other applications that require duals or wide tires, if equipped with the on-land kit it is no longer necessary to dismount the wheels in order to use the tractor for plowing.

Hydraulic Valves

Hydraulic sequencing comes standard meaning fewer valves to operate during headland turns. Ease of use is always important when handling large machinery. With this system, there are fewer hydraulic valves to operate on headlands. Hydraulic sequencing also allows for automatic folding of the offset when the plow is being lifted.

Skimmer

Each skimmer is independent of another and firmly held in a sheath-like support. The skimmers are shear bolt protected and are adjustable in three directions.

Forward and backward-with a choice of three positions, the sheath bolts to the leg support via countersunk holes to avoid any risk of free play.
Up and down-rapid and precise height adjustments (8” of adjustment) with countersunk holes in the skimmer leg for easy locking of the leg for the desired height.
Side to side-for correct adjustment in relation to the disc coulter (where fitted).

Equipment

Depth and Transport Wheels

The 20” steel or 24” rubber wheel follows any change of plowing widths and features simple depth adjustment by screw adjuster, with the possibility of setting left and right sides differently. It can be placed in many locations on the frame to ensure optimum positioning for all conditions.

Media

View the gallery in full screen

Video aGuWhIoEKAg

Customer Spotlight: Vari-Leader

Peter Hendriks Listowel, Ontario, Canada
“I’m happy with the plow (KUHN Vari-Leader Semi-Mounted Rollover Plow) and our neighbors are saying it did a good job for them too. They are really impressed with the little tractor pulling the plow in such heavy ground.”
Read this review

/about-kuhn/kuhn-world/testimonials

Vari-Leader Moldboard Plow