Oscillating 3-Point Hitch
An oscillating 3-point hitch, with floating or variable pivot on the mowing head allows the mowing head to adapt to mowing conditions dictated by terrain.
Whether it’s the fight against weeds on field edges or road maintenance – there is a solution available for everyone. In multiple conditions, the KUHN TB 211 Series mowers provide you with versatility. These mowers are also supported by their sturdy design and protection features to avoid damage.
Maintenance mowing has to be done in a variety of environments, but will usually take place in grassy areas with a high chance of hidden foreign objects. The TB series has been designed specifically for these types of operations. These mowers will easily meet your offset mowing needs. The design is suited for hedge work with operating angles from -65° to +90°.
Maintenance mowing has to be done in a variety of environments, but will usually take place in grassy areas with a high chance of hidden foreign objects. The TB series has been designed specifically for these types of operations. These mowers will easily meet your offset mowing needs. The design is suited for hedge work with operating angles from -65° to +90°.
Your benefits
Easily Adapt to Mowing Conditions
Rear Roller
The 6” diameter rear roller provides optimal height control, eliminates ruts in loose soils and provides better clearance over irregular ground.
Protect Against Impact
Non-Stop Safety Spring
When meeting an obstacle, the machine frame is protected by a non-stop spring-loaded safety system. After the obstacle is cleared, the machine will automatically return to working position. Moreover, the mechanical parts which are exposed to impact are all protected and the hood features a bolted 4 mm thick sheet metal lining for increased resistance to impacts and wear.
Frame
Designed for intensive use, the frame of the KUHN TB offset mower is unmatched with its reliability and longevity. This machine includes self-lubricating bushings on all pivot points.
More Mowing Options and Possibilities
Wide Angle PTO joint
A wide angle PTO joint is standard. This is one of the most important features on the machine, especially if you spend a large amount of time in the field with the machine in a vertical position.
Knife Options
- Universal Knives - Offer a more substantial option than the articulated knives when powering through heavier crop.
- Articulated Universal Knives - Offer more freedom to clear obstructions in grass conditions.
- Articulated Hammer Knives - Create lift for a clean cut. The shackle allows more freedom to clear obstructions hidden in grass conditions.
- Pallet-Type Finishing Knives - Create lift for a clean cut. Pallet knives are suitable for use in parks and lawns, or any place that a clean finish is desired.
- Hammer Knives - Hammer knives are designed for shredding with plenty of lift and extra weight to power through brush up to 2”. Not for use in rocky conditions.
Specifications
SPECIFICATIONS
| Working width |
|---|
| Number of hammer knives |
| Number of universal knives |
| Inner protection cover |
| Mechanical breakaway system |
| Height adjustment by roller with removable ends |
| Curved skid shoes |
| Free wheel integrated in the central gearbox |
| Wide angle PTO shaft |
| Hitch type |
| Required tractor hydraulic connections |
| Machine net weight, approx. with roller |
| PTO speed (rpm) |
| Rotor diameter |
| Minimum PTO power requirement |
| Maximum PTO power recommended |
| [TB211] |
|---|
| 6'8" (2.03 m) |
| - |
| 56 |
| Standard |
| Standard |
| Standard |
| Standard |
| Standard |
| Standard |
| Cat. 2, 3-point |
| 1 SA and 1 DA |
| 1,720 lbs (780 kg) |
| 540 |
| 16.5" (42 cm) |
| 70 hp (53 kW) |
| 100 hp (75 kW) |
Media
